← Support

Dawnproof window support

Install Dawnproof

Follow the path for your product, from preparing the opening to the final fit check.

Dawnproof Fixed

For a fitted, everyday window system.

Check the recess, record three widths and three heights, then follow the supplied installation guide.

View Fixed

Dawnproof Anywhere

For portable, made-to-measure blackout.

Enter only the finished coverage width and height. The thickened two-layer panel fastens to a clean, dry, suitable surface with hook-and-loop strips.

View Anywhere
Real installed product and full movement

Full product overview

Know the finished movement before you begin.

The leading rail should travel across the opening and the continuous shade should gather at the selected side.

  • Perimeter frame
  • Continuous shade and leading rail
  • Order-specific components and guide

Before opening the box

Keep the supplied guide with your order.

Components and fastening details can vary by order. Keep every supplied part together and follow the packaged sequence.

Clear work areaSupplied componentsOrder guideSecond person for a larger system
1
Dawnproof Fixed system and visible components

Unbox and identify

Find the fixed side, moving rail and supplied components.

Keep all fittings together and use the hardware and sequence supplied with your order.

2
Clearing and rechecking the recessed opening

Prepare the opening

Clear the recess and compare it with your order.

Stop if the opening, trim, screen, handle or lock no longer matches the submitted details.

3
Dawnproof Fixed perimeter and side-moving shade details

Assemble in order

Follow the guide supplied with your order.

Complete the assembly and perimeter-preparation steps in sequence before positioning the system.

4
Two adults positioning Dawnproof Fixed in the window recess

Position in the frame

Support the perimeter evenly and keep it square.

Do not bow or force the system into an opening that no longer matches the submitted measurements.

5
Dawnproof Fixed leading rail meeting the perimeter edge

Secure and check the perimeter

Use the supplied fastening and finishing sequence.

Work progressively, keep the frame square and check that the moving edge meets the perimeter as shown in the order guide.

6
Real product footage

Test the full travel

Close it, pause it and gather it aside.

If movement catches, stop. Check the track and frame alignment, then contact support rather than forcing the rail.

Troubleshooting

Show support the opening and the movement.

Send the order number, a front photo, a side photo and a short video showing where the movement changes.

Contact support

Installation questions

Is every Fixed installation the same?
The supplied components can vary by order, so follow the guide packaged with your system.
Can I force the leading rail if it catches?
No. Stop, check for debris and frame alignment, then contact support if resistance continues.
What should I send support?
Include the order number, a front photo, a side photo and a short operation video.